Protective Clothing: Tests & Capabilities
TRI is A2LA accredited to ISO/IEC 17025 for the specific test methods listed on A2LA Certificate Number 5132.01.
| RELEVANT STANDARDS | |
| ISO 12947 | Abrasion Resistance |
| ASTM D 4966 | Abrasion Resistance – Martindale |
| ASTM D 3787 | Ball Burst Strength |
| ASTM D 751 | Ball Burst Strength |
| ASTM F 1060 | Conductive Heat / Hot Surface |
| ISO 13997 | Cut Test |
| ANSI 2011 | Cut Test via CPPT |
| ASTM F 1790 | Cut Test via CPPT |
| ANSI 2011 | Cut Test via TDM 100 |
| ASTM F 1790 | Cut Test via TDM 100 |
| ASTM F 2992-15 | Cut Test via TDM 100 |
| EN 420 | Hand Dexterity |
| ASTM F 2878 | Hypodermic Needle Puncture |
| ASTM F 903 | Penetration |
| ASTM F 739 | Permeation |
| ASTM D 4970 | Pilling via Martindale |
| ASTM D 2582 | Puncture Propagation Tear |
| ANSI 2011 | Puncture Resistance |
| ASTM F 1342 | Puncture Resistance |
| ISO 13996 | Puncture Resistance |
| ASTM D 3389 | Taber Abrasion |
| ASTM D 3884 | Taber Abrasion |
| ASTM D 4060 | Taber Abrasion |
| ANSI 2011 | Taber Abrasion Resistance |
| EN 388 | Tear Resistance |
| ASTM D 412 | Tensile Strength |
| ASTM D 5034 | Tensile Strength |
| ASTM D 5035 | Tensile Strength |
| ASTM D 751 | Tensile Strength |
Not all testing listed above is inlcuded in our A2LA Scope of Accreditation. Please consult A2LA Certificate 5132.01 for a list of accredited tests.
