| RELEVANT STANDARDS |
| ISO 12947 |
Abrasion Resistance |
| ASTM D 4966 |
Abrasion Resistance – Martindale |
| ASTM D 3787 |
Ball Burst Strength |
| ASTM D 751 |
Ball Burst Strength |
| ASTM F 1060 |
Conductive Heat / Hot Surface |
| ISO 13997 |
Cut Test |
| ANSI 2011 |
Cut Test via CPPT |
| ASTM F 1790 |
Cut Test via CPPT |
| ANSI 2011 |
Cut Test via TDM 100 |
| ASTM F 1790 |
Cut Test via TDM 100 |
| ASTM F 2992-15 |
Cut Test via TDM 100 |
| EN 420 |
Hand Dexterity |
| ASTM F 2878 |
Hypodermic Needle Puncture |
| ASTM F 903 |
Penetration |
| ASTM F 739 |
Permeation |
| ASTM D 4970 |
Pilling via Martindale |
| ASTM D 2582 |
Puncture Propagation Tear |
| ANSI 2011 |
Puncture Resistance |
| ASTM F 1342 |
Puncture Resistance |
| ISO 13996 |
Puncture Resistance |
| ASTM D 3389 |
Taber Abrasion |
| ASTM D 3884 |
Taber Abrasion |
| ASTM D 4060 |
Taber Abrasion |
| ANSI 2011 |
Taber Abrasion Resistance |
| EN 388 |
Tear Resistance |
| ASTM D 412 |
Tensile Strength |
| ASTM D 5034 |
Tensile Strength |
| ASTM D 5035 |
Tensile Strength |
| ASTM D 751 |
Tensile Strength |
| ASTM D 4533 |
Trapezoidal Tear |
